18" Torpedo Burner
Nozzle design technology creates a high flame bonfire effect. Available for use with natural or propane gas outdoor fire features.
Technical:
- 150,000 BTU
- 304 stainless steel
- 1/2" FIP located in center hub of ring
- Maximum gas supply pressure: Natural gas (7" water column, 1/4 psi)
- Maximum gas supply pressure: Propane gas (11" water column)
- Propane conversion kit includes: Air mixer fitting, gas coupling and gas pipe
- Propane conversion fitting is designed to reduce soot and improve flame appearance
General Information:
- Burner Size: Choose a burner at least 6” smaller than inside opening of fire pit
- Fire Pit Pan: Flame Creation offers one of the largest selections of pans. Custom size pans available
- Installation L-Bracket: Bracket designed to support fire pit pan if masonry structure does not have a support ledge. Continue shopping to view all our installation supplies
- Key Valve Kits: Manual gas valve controls gas flow and flame height. When valve is installed inside fire pit an extended key may be required (Available key lengths: 3”, 8”, 12”, 18”)
Buyers Guide For Natural Gas Burners
- For fire rated river rocks and river stones. Install stones on top of base material
- For fire pit logs and medium size lava rock applications. Apply base material of crushed or small lava rock to top of burner. Install logs or lava rock on base material
Buyers Guide for Propane (LP) Gas Burners
- Fire pit burner pan required for propane applications
- Do not install more than 1/4" of fire glass or small lava rock above burner holes.
- Do not block burner holes with media
- Propane gas produces a black soot. Colored fire glass and decorative media will discolor during use- Consider using black fire glass or lava rock for your decorative media
- Lava rock (3" or larger) and gas logs can be used as long as burner holes are not blocked
- When designing and constructing fire feature ventilation is required
- Important! Propane gas is a heavy gas. Applying too much media over burner may create back pressure and gas leakage resulting in gas pooling in fire pit. Do not operate fire pit if this condition exists
- A minimum of two ventilation openings 18 sq. inches each (Example: 6” x 3”) and orientated 180 degrees apart must be installed at base of enclosure
Continue Shopping to View All of Our Fire Pit Products
- Fire Pit Frames
- Electronic Ignition Burner Systems
- Installation Supplies: Gas valves, whistle free flexible gas lines, vents, pans
- Premium Accessories: Fire glass, gas logs, river stones, lava rock, covers
"Striving to be your flame source headquarters"
All information provided is for general information only. Designing, installing, and servicing of any gas burner and fire feature must be performed by a qualified professional and gas supplier. Installations must conform to local codes or in the absence of local codes refer to the National Fuel Gas Code (ANSI Z223.1 or CAN/CGA 8149.1), National Fuel Gas Installation Code, Propane Installation Code or CAN/CGA B149.2
