124" Trough Burner Kit
Linear burner and pan is ideal for outdoor fire pits, fire bowls, fire tables and custom flame creations
For use with natural or propane gas applications
Gas Burner Kit Includes: Pan, torpedo burner, flexible gas line, valve, key, decorative valve cover, gas pipe elbows.
Dimensions:
- Burner length: 120"
- Pan opening: 124" L x 8" W
- Pan Lip: 1 1/4"
- Pan w/ Lip: 126 1/2" L x 10 1/2" W
- Pan depth: 2"
Technical:
- 300,000 btu torpedo burner
- High capacity key valve (3/4" npt) for natural gas applications
- Standard key valve (1/2" npt) for propane gas applications
- Premium 304 stainless steel, 1 mm wall thickness
- Burner holes are drilled and staggered for maximum flame effect
- 1/2" MIP located in center of burner
- Maximum gas pressure requirement: Natural gas (7" wc, 1/4 psi), Propane gas - 11" water column)
- LP conversion fitting is designed to reduce sooting and improve flame appearance
- Do not use corrugated gas lines from source to fire feature or you may experience a whistling noise during operation
Cost to operate:
- Estimated cost to operate fire ring with gas usage of 70,000 btu per hour:
- Hourly cost $.90. Based on natural gas cost of $1.20 per therm
- Hourly cost $1.70 Based on propane gas cost of $2.10 per gallon
Buyers Guide For Natural Gas Burners
- Install approved media up to 2" above burner (natural gas applications only)
Buyers Guide for Liquid Propane (LP) Gas Burners
- Do not install more than 1/4" of glass or small lava rock above burner holes. Do not block burner holes
- Large lava rock (3" or larger) and gas logs can be used as long as burner holes are not blocked
- Due to sooting (a residue which occurs from LP gas burning) we suggest using black glass rather than colored glass
- When designing and constructing fire feature be sure to provide adequate ventilation
Warning - For your safety
- *** Wet lava rock can explode when heated. Allow fire pit to burn at least 45 minutes or until lava rock is dry before coming within 15 feet of fire during start up. Consider covering fire pit to keep lava rock dry to prevent this occurrence or use lava rock 3" in diameter or larger.
- *** LP gas is a heavy gas. Applying too much media over burner holes may create back pressure and gas leakage resulting in gas pooling in fire pit.
- *** A minimum of two ventilation openings 18 sq. in. each and orientated 180 degrees apart must be installed at base of enclosure for LP gas fire pits
All information provided is for general information only. Designing, installing, and servicing of any gas burner and fire feature must be performed by a qualified professional and gas supplier. Installations must conform to local codes or in the absence of local codes refer to the National Fuel Gas Code (ANSI Z223.1 or CAN/CGA 8149.1), National Fuel Gas Installation Code, Propane Installation Code or CAN/CGA B149.2
Additional products available from Flame Creation, LLC
- Electronic ignition burner systems
- Gas keys (Lengths: 3", 8", 12", 18", 24")
- Custom and prefabricated fire pit frames
- Premium accessories available: Fire glass, river stones, lava rock
"STRIVING TO BE YOUR FLAME SOURCE HEADQUARTERS"
