9 ft. 10" Prefabricated fire pit frame with 6" decking.
Featuring a certified 8 ft. linear electronic ignition burner
Ideal for commercial and residential projects requiring the convenience and safety of an electronic burner system
Can be operated with a remote, timer or wall switch.
Gas fire pit frame kit includes:
- Heavy duty frame construction
- Torpedo burner
- Stainless steel pan
- Fully assembled electronic ignition gas burner insert
- Stainless steel flexible gas line for convenient gas connection
- Available in natural or propane gas
Electronic ignition burner system:
- 120VAC burner system
- Electrical requirement: 120VAC from source (wall switch, timer or remote) to burner
- 24VAC burner system
- Electrical requirement: 120VAC from source to transformer (power supply). Low voltage (24VAC) from power supply to burner
- 8 ft. stainless steel burner (250,000 btu)
- CSA certified
Options:
- Electronic Ignition Control Type
- On/Off Operation: Burner system turns on/off with wall switch, remote, timer or home automation (purchased separately)
- On/Off Operation with Remote: Includes remote and receiver which can be plugged into an approved outlet
- High/Low Operation with Remote: Includes a smart remote control with Bluetooth technology which adjust flame from high to 45% turndown
- Gas Key Valve Kit
- Valve kit includes: brass valve, decorative valve cover, flexible gas line and choice of 3", 8", 12", 18" key
Fire Glass Information:
- 100 lbs of fire glass is recommended for natural gas applications
- 70 lbs of fire glass is recommended for propane gas applications
- Propane applications: Apply up to 1/4" of fire glass over burner. Do not block burner holes with media
- Burner pilot area and pilot hood must be clear of any media or debris to operate
Buyers Guide:
- Timer and emergency stop switch sold separately- see our installation supplies
- Burner must be covered when not in use. Custom metal and fabric cover available
- Prefabricated fire pit allows you to be creative finishing the exterior of frame
- Continue shopping for installation supplies and fire pit accessories to enhance the flame
- Electronic burners require outdoor approved wire with conduit from source to fire pit
- GFCI protected circuit must be utilized
- Ventilation required
Frame Dimension: 118" L x 23" W (min. height 18")
Pan Dimension: 105 1/2" L x 10 1/2" W
